12311 ... »
  1. #1
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)

    Zubehör von Coov

    Ich denke wir sollten hier weiter diskutieren um das Zubehör der Firma CooV.
    Nebenbei informier ich über neue Firmware der Firma zu den einzelnen Produkten in ermanglung einer englischen Produkt Seite



    So was ist CooV?

    CooV ist ein Chinesischer Hersteller der Zubehör für die Switch macht.
    Im Moment Sind das:
    -der N100 - Firmware Übersicht hier im Thread
    -der HDMI Hub SH350
    -das HBoard i3
    -dem SH500 Dock
    -dem SH500 Skins
    -dem N200 Set ( bestehend aus N200s und N200T) - Firmware Übersicht hier im Thread
    -dem Hub K4
    -dem Netzteil UP145 .
    -der N100Pro - Firmware Übersicht hier im Thread
    -SH350 Pro (neue Updatefähige Version des SH350)
    -SH500 Pro (neue Updatefähige Version des SH500)

    Wiki zu N100, N100 Pro, N200 und Hub K4 in Chinesisch.
    Google Übersetzer nutzen LINK
    Es sind Unter anderem Dann die Anleitungen sehr gut in Englisch dort zu lesen

    Gamescript Seite

    N100

    N100 ist ein USB Stick der an die Switch angesteckt wird und es ermöglicht einen Playstation 3, 4, Xbox 360, Xbox One und Xbox One Elite Gamepad an der Switch zu nutzen.
    Es ist auch möglich Gamepads (für PS3, PS4, Xbox 360 und Xbox One)von drittherstellern zu nutzen wobei hier es jeweils getestet werden muss ob das jenige geht.
    Als Beispiel!
    Mein Speedlink Xeox Wireless Gamepad was einen Funk USB Adapter für die PS3 hat funktioniert mit dem N100 Problemlos wenn ich den Adapter einstecke.



    Die Firmware des N100 hat die Möglichkeit zum update, kalibrieren der analog Sticks, der Vibration und Key mapping.
    Ab 2.03B kam die Unterstützung für den DualShock 4 USB Wireless Adapter (von Sony) was das Kabel zum Gamepad überflüssig macht.

    Der Usb stick wird ins dock


    oder per usb On the Go Kabel an die switch angesteckt.


    Da dran kommt dann das Kabel oder Wireless Adapter ( ab firmware 2.3B der DualShock 4 USB Wireless Adapter (Sony))

    Firmware history
    1.00 Release
    1.01 21.7.2017
    1.02 2.8.2017
    2.01 10.8.2017
    2.02 15.8.2017
    2.03 20.8.2017
    2.03B 23.8.2017 - unterstüzung des DualShock 4 USB Wireless Adapter (Sony)
    2.04 09.09.2017
    3.00 30.11.2017 - Maus und Tastatur Unterstützung
    3.2 05.12.2017
    3.4 12.12.2017
    4.0 04.01.2018
    5.2 05.02.2018
    5.3 15.02.2018
    5.4 06.03.2018
    5.5 27.03.2018
    5.7 21.06.2018
    Alle Firmwares funktionieren mit dem derzeitigem Switch System 3.0.2.
    Die Versionen 2.01 und 2.02 unterstützen die Vibration.
    2.03 und 2.03B unterstützen nicht immer Vibration. Ich hab 2 Sticks und bei einen Stick geht es unter 2.03/B und beim anderen nicht.
    2.04 unterstütz wieder Vibration auf meinen beiden Sticks. Diese Firmware ist derzeit zu empfehlen!

    Changelog
    Spoiler
    21 July 2017 – V1.01:
    1. Added support for Xbox One Elite Handle
    2. Increase the filtering mechanism for rocker rebound jitter


    02 August 2017 – V 1.02:
    1. Increase the joystick calibration function
    2. Added support for a pirated PS4 handle

    10 August 2017 - V 2.01:
    1. Support vibration
    2. Support somatosensory connection (PS4 handle only)
    3. Support part of the host with automatic identification function of the handle, such as BTP-BD2E
    4. Vibration function stability repair

    Note: Set "Pro Controller Wired Communication" to ON

    15 August 2017 - V 2.02:
    1. Vibration function stability repair
    2. Joystick optimization

    20 August 2017 - V 2.03:
    1. Trigger key burst and map function repair
    2. 2.x version configuration mode vibration prompt repair
    3. Increase the vibration switch and the intensity adjustment function

    23 August 2017 – V 2.03B:
    1. Domestic PS4 handle and wireless PS4 receiver driver compatibility compatibility, the temporary removal of domestic support PS4 handle

    09 Semptember 2017 - V 2.04
    September 9, 2017 (V2.04):
    1. Stability fixes, to solve the problem of abnormal triggering
    2. Support SWITCH access to multiple COOV N100 at the same time
    3. Support access to Nintendo SWITCH PRO handle
    4. Support Mad Catz PS4 handle and PS4 wireless receiver
    5. The vibration intensity in the default state is adjusted to low, not closed

    30 November 2017 - V3.0
    1. Support XBOX ONE host, with the original handle to guide
    2. Support PS4 host, need to cooperate with the original handle guide
    3. Support connection keyboard, mouse, HID handle, HID fighting joystick control, to be with the COOV HUB K4
    4. NS mode rocker smooth and smooth optimization
    5. Multiple handle connection optimization
    6. Support the handle button mapped to the keyboard and mouse rocker

    05 Dezember 2017 - V3.2
    Kein Changelog!

    12 Dezember 2017 - V3.4
    1. In the key map configuration process, filter out mouse touch error
    2.PRO handle support optimization, the main solution to some input conflicts
    3. Repair XB1 handle LT RT data abnormal situation
    4. Repair a key trick strokes and even strokes interfere with the problem
    5. Fix a data processing logic problem

    04 Januar 2018 - V4.00
    1. Increase the Android APP support, currently available for adjusting the mouse conversion parameters
    2. Increase the key lock function, used to achieve indefinite pressure, but also can be used with the hair, a key move to achieve unlimited automatic operation
    3. One button move optimization: support through the key mouse button to trigger
    4. One button move Optimization: Improve the light prompts
    5. Button Mapping Optimization: Support Touch Key (DS4) / Screenshot Key (PRO)
    6. Button Map Optimization: Supports a single clear handle map
    7. Bursts of optimization: frequency gear from 5 to 19, the minimum interval of 25ms. The maximum interval of 500ms
    8.DS4 handle: the handle connected to the converter, it will light purple


    05 February 2018 - V5.0
    1. Support four groups of independent configuration of real-time switching: V5.0 firmware can save 4 groups of configuration, start loading default configuration of the first group. Inter-group configuration does not interfere with each other, you can use the HOME + LB or HOME + RB fast switch. Switching, there will be LED (red, green, blue, yellow) and vibration tips
    2. Support Android system (mobile phone, tablet, TV box)
    3. Support by closing the linear to enhance even strokes recording time
    4. Increase the linear level (key process) Custom: adjust the left and right joysticks and left and right triggers linear level, each with seven stalls, the key process as follows: 100%, 80%, 66%, 50%, 25% , 12%, 1%. 100% of the key stroke is equivalent to the linear open state, 1% key stroke is equivalent to the linear closure.
    5. A key trick: Up to 10 groups can be recorded, the shortest recordable single-group 2.5 seconds, the longest record of a single group can be more than one hour. In addition, multi-cascade connection is supported. When the recorded data exceeds the length of a single group, the idle group cascade is automatically used. In this mode, continuous recording can be performed for 25 seconds even if the joystick is turned continuously (linearly on).
    6. Use the key lock + even strokes function infinite loop, lift the key lock will immediately stop the loop
    7. Optimize the vibration of the pro handle support

    15 February 2018 - V5.3
    1. Repair NS host vibration feature missing problem

    06 March 2018 -V5.4
    1. Fixed an issue where some keyboards and mice could not be used on K4

    27 März 2018 - V5.5
    1. Added support for Win10 system (Xinput), Win7/Vista users please use dedicated firmware
    2. Added support for Android (Xinput)
    3. Cancel the automatic vibration of X1 handle connection
    4. Reduce the vibration intensity when configuring advanced features
    5. Added joystick calibration function to support pro handle
    6. Fixed BUG where HID data was ignored in some cases
    7. Fix the bug that the Xbox One S handle cannot be used as a boot handle

    21 June 2018 - V5.7
    1. Support handle audio function in Xbox host usage scenario
    2. Optimize support for HID peripherals, such as HID handles, HID sticks, composite HID devices, etc.
    3. Optimize the recording accuracy of the next button of the NS host (25% reduction in recordable time)
    4. Support adjustment of mouse parameters using Chrome app for Android phones (USB ADB needs to be enabled)


    N100 SpezialFirmware:
    Es wird aber einzig der Nfc/Amiibo leser nicht unterstützt ähnlich wie beim Pro controller wenn man ihn per Kabel ansteckt ( darauf weisst nintendo sogar hin) aber alles andere wird unterstütz.
    Verarbeitung ist sehr gut und das gesamte Gehäuse besteht aus Metall.
    Farben gibt es in Schwarz, leichtem Pink oder grünen Gehäuse.


    Belegung ist wie Folgt:
    Spoiler



    Mehrere N100 gleichzeitig
    Es ist möglich mit 2 N100 Sticks gleichzeitig zu spielen.
    Aber dazu gibt es einig paar Sachen zu beachten dazu hier mehr.

    Bis firmware 2.03B

    Spoiler
    Um 2 N100 Sticks zu nutzen braucht es folgende Kombinationen der Firmware:

    USB Stick 1: 2.01, 2.02, 2.03, 2.03B
    USB Stick 2: 1.00, 1.01, 1.02

    In dieser Kombination also 1 Stick mit 2.XX Firmware und der andere Stick mit 1.XX Firmware gehen beide USB Sticks.
    Es geht ebenso die Kombination das auf beiden Sticks eine 1.XX Firmware drauf ist.
    Damit sind 2 Spieler mit 2 Controllern möglich.


    In der kombination das auf beiden Sticks eine 2.XX Firmware geht es NICHT! mit 2 USB Stick gleichzeitig zu spielen.


    Ab Fimware 2.04
    Unter Firmware 2.04 ist es möglich 2 Sticks oder mehr zu nutzen die alle Firmware 2.04 (oder höher nutzen).
    Daher ist für Multiplayer vor Ort diese Firmware zu empfehlen.




    Kostenpreis Ebay so 7-10 Euro und bei AliExpress etwa 10 euro.
    Man kann den stick auch hinten im Dock reinstecken ohne Probleme damit wäre nur noch das usb Kabel raus hängend.

    Hersteller Video
    http://video.realxen.com/kuwei/COOV%20N100%20Nintendo%20Switch%20Gamepad%20Conver ter.mp4

    Zum 2.01 Update
    http://video.realxen.com/kuwei/N100%...iangengxin.mp4


    Ein erstes Video von mir dazu:
    Spoiler


    Mein fazit?
    Sehr gute Verarbeitung und tut was es verspricht und unterstützt zb Key Mapping.
    Für die die eins der Gamepads der letzten 2 Playstation oder Xbox Generationen haben eine gute Alternative zum teueren Pro Controller wenn man die ja schon hat.

    Was ich bisher hörte ist das man auch 2 solche USB Sticks nutzen kann und die mit einer verlängerung beide an das Dock anschliessen kann.
    In ermanglung an 2 Solche Sticks kann ich es nicht testen.


    Firmware Liste zum N200 Set

    Versionen
    Changelog
    3.2 - 05 Dezember 2017
    ????

    3.4 - 12 Dezember 2017
    Repair N200S recognition and N200T button detection optimization

    4.0 - 04 Januar 2018
    1. Increase the Android APP support, currently available for adjusting the mouse conversion parameters
    2. Increase the key lock function, used to achieve indefinite pressure, but also can be used with the hair, a key move to achieve unlimited automatic operation
    3. One button move optimization: support through the key mouse button to trigger
    4. One button move Optimization: Improve the light prompts
    5. Button Mapping Optimization: Support Touch Key (DS4) / Screenshot Key (PRO)
    6. Button Map Optimization: Supports a single clear handle map
    7. Bursts of optimization: frequency gear from 5 to 19, the minimum interval of 25ms. The maximum interval of 500ms
    8.DS4 handle: the handle connected to the converter, it will light purple

    N200T:
    Fix the edge while playing a state of BUG
    Key detection optimization
    Low battery indicator

    5.2 - 05 February 2018
    1. Support four groups of independent configuration of real-time switching: V5.0 firmware can save 4 groups of configuration, start loading default configuration of the first group. Inter-group configuration does not interfere with each other, you can use the HOME + LB or HOME + RB fast switch. Switching, there will be LED (red, green, blue, yellow) and vibration tips
    2. Support Android system (mobile phone, tablet, TV box)
    3. Support by closing the linear to enhance even strokes recording time
    4. Increase the linear level (key process) Custom: adjust the left and right joysticks and left and right triggers linear level, each with seven stalls, the key process as follows: 100%, 80%, 66%, 50%, 25% , 12%, 1%. 100% of the key stroke is equivalent to the linear open state, 1% key stroke is equivalent to the linear closure.
    5. A key trick: Up to 10 groups can be recorded, the shortest recordable single-group 2.5 seconds, the longest record of a single group can be more than one hour. In addition, multi-cascade connection is supported. When the recorded data exceeds the length of a single group, the idle group cascade is automatically used. In this mode, continuous recording can be performed for 25 seconds even if the joystick is turned continuously (linearly on).
    6. Use the key lock + even strokes function infinite loop, lift the key lock will immediately stop the loop
    7. Optimize the vibration of the pro handle support

    15 February 2018 - V5.3
    1. Repair NS host vibration feature missing problem


    06 March 2018 -V5.4
    1. Fixed an issue where some keyboards and mice could not be used on K4

    N200 Spezial Firmware
    Splatoon 2 Plotter

    N100 Pro Firmware

    Versionen

    1.0 - Release Firmware
    1.1 - 16.3.2018
    1.2 - 17.3.2018
    1.3 - 24.3.2018
    1.5 - 21.6.2018


    Changelog
    1.1 - 16.3.2018
    1. Supports Windows system (Xinput)
    2. Support Android system (Xinput)
    3. Support vibration function when Bluetooth connects Xbox One S handle
    4. Support joystick calibration function of the handle
    5. No longer automatically vibrate the X1 handle after it is connected
    6. Reduce vibration intensity when configuring advanced features

    1.2 - 17.3.2018
    Fix possible inadvertent situations when connecting Bluetooth to Xbox One S

    1.3 - 24.3.2018
    1. Fix the bug that HID data is ignored in some cases
    2. Fix the bug that the Xbox One S handle cannot be used as a boot handle
    3. Fix BUG that Pro handle can't automatically reconnect via Bluetooth

    1.5 - 21.06.2018
    1. Support handle audio function in Xbox host usage scenari

    Spezial Firmware
    Splatoon 2 Plotter
    Geändert von Liriel (26.07.2018 um 01:38 Uhr)

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  2. #2
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)



    SH350


    Der Sh350 ist ein mini dock wie viele andere.
    Hier muss ich das erst noch testen ob das mit der Switch geht.
    Aussehen tut es wie die meisten Hdmi splitter für USB Typ C.
    Farben sind Weiss und Schwarz
    Ob das nun den Codec den die Switch braucht unterstütz wird sich zeigen wenn ichs da habe.

    Hersteller Video Zum SH350
    http://video.realxen.com/kuwei/SH350shiping.mp4

    Hierzu gibt es mehr sobald ich das habe.




    Firmware, Anleitungen und Co Findet man auf der Firmenseite http://mycoov.com/zh/Product/




    Splatoon 2 Automatic Plotter Firmware V1.0 für den N100


    Die Macher haben eine kleine Spezial Firmware ( Ich nenn die mal V1.0 da es ja updates dafür geben kann) freigegeben die sich an die Künstler in Splatoon 2 richtet!

    Genauer gesagt geht es um die gezeichneten Bilder Die man Posten kann.

    Im endeffekt ist die Firmware so angepasst das man so ein 320x120 Monochrom Bild
    capture_002_26082017_222636.jpg
    in Dieses Splatoon 2 Bild zu verwandeln.
    capture_001_26082017_222613.jpg


    Im ganzen startet man das Spiel und steckt den Stick mit dem Gamepad an.
    Man wählt die unterste linke Ecke und den kleinsten Stift und startet auf dem Gamepad durch gleichzeitiges drücken der 3 Tasten ( linker trigger aka L2, Home aka PS Taste, + aka Options) den ganzen Vorgang.

    Dann beginnt die Software von links nach rechts und dann rechts nach links usw usw jeden einzelnen Pixel zu setzen wie bei einem Plotter.
    Dauert dann etwa 62 min und das Bild ist fertig.

    Wie gesagt ist dies etwas für die die nicht mit dem Analog Stick oder Touchscreen zeichnen können.

    Diese spezielle Firmware ist nur zum Zeichnen in Splatoon 2
    Geändert von Liriel (30.03.2018 um 15:58 Uhr)

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  3. #3
    Avatar von tiki22
    Registriert seit
    17.11.2010
    Ort
    Deutschland
    Beiträge
    15.267
    Spielt gerade
    Assassin's Creed: Origins, Cuphead, Pokémon Gold
    Konsolen
    Switch Xbox One PS4 Wii U PS Vita 3DS Wii DS PS3 XBOX 360 GC GBA N64 GB
    Mini NES, PS2, Sega MD, iPad, PC (i5-4570 4x3.20GHz | ASUS GTX 1080 11Gbps | 16GB RAM)
    Und das Bild, welches in Splatoon 2 gezeichnet werden soll, lädt man dann vorher über den PC auf den Stick?

  4. #4
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)
    Genau! Es muss ein 320x120 bmp Bild in monochrom sein und das wird als data.bin gespeichert und auf den Adapter kopiert werden inkl der speziellen Firmware Datei ( ist halt keine Firmware zum spielen).
    Dann die 3 Tasten gleichzeitig drücken und dann beginnt er automatisch an zu arbeiten.
    Er geht halt Zeile für Zeile von links nach rechts und zurück und setzt dabei immer einzelne schwarze Punkte die dann fertig das Bild ergeben.

    Das verfahren dauert halt etwa 62 Minuten.

    Teste es gerade selber und das Bild ist fast fertig und dann kann ich auch bilder vom Verfahren posten.

    Ist das erledigt kann man die normale Firmware wieder aufspielen und zocken mit dem Stick.

    ICh Finde die Firmware irgendwie Geil!
    Geändert von Liriel (27.08.2017 um 05:38 Uhr)

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  5. #5
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)
    So das war meine Bildvorgabe als datei
    81525.jpg

    Das ist aus dem arbeitsprozess
    2017082623155300-397A963DA4660090D65D330174AC6B04.jpg
    2017082623172500-397A963DA4660090D65D330174AC6B04.jpg

    und zum schluss sah es so aus
    2017082623263600-397A963DA4660090D65D330174AC6B04.jpg

    Jetzt weiss ich wie wohl manche Kunstwerke in Splatoon 2 zustande kommen.


    Ich hol mir nun nen zweiten stick extra nur dafür und um zu testen ob 2 n100 gleichzeitig gehen. ^^
    Da hab ich ihn im übrigen her Lieferzeit waren 24 Tage ohne das ich zum Zoll musste.


    EDIT:
    Ich poste heute mal ein Video im Zeitraffer (hoffe ich krieg es hin) von der Aktion.
    Hab auch falsche Zeitdauer geschrieben denn es sind 62 Minuten und net 16!
    Geändert von Liriel (27.08.2017 um 05:40 Uhr)

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  6. #6
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)
    so ein besseres Video zur Funktion des N100 in Spielen
    Spoiler



    Der Splatoon 2 Autoplotter in Action
    Spoiler

    Hab den Zeichenmodus im Zeitraffer da das 62 Minuten waren aber man sieht halt wie es geht

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  7. #7
    Avatar von tiki22
    Registriert seit
    17.11.2010
    Ort
    Deutschland
    Beiträge
    15.267
    Spielt gerade
    Assassin's Creed: Origins, Cuphead, Pokémon Gold
    Konsolen
    Switch Xbox One PS4 Wii U PS Vita 3DS Wii DS PS3 XBOX 360 GC GBA N64 GB
    Mini NES, PS2, Sega MD, iPad, PC (i5-4570 4x3.20GHz | ASUS GTX 1080 11Gbps | 16GB RAM)
    Eigentlich ja ne coole Sache mit dem Zeichnen, aber ich hätte keine Lust 62 Minuten nur für so eine Zeichnung zu warten. Das müsste eindeutig schneller gehen, damit ich das Feature mal nutzen würde.

  8. #8
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)
    Geht glaube net da ja Pixel für Pixel (etwa 38400 pixel) abgefahren wird.
    Das hat glaube auch was mit den Tastenbefehlen geben zu tun.
    Sind bei 62 minuten etwa 10 pixel pro sekunde.


    Aber man kanns schön nebenher laufen lassen während man was anderes tut wie zb Uncharted zocken. ^^


    Die ganzen Sachen wie zb über Arduino usw usw sind auch net schneller.
    Der das zeichnen mit Lego Technik macht braucht rund 5 Stunden.
    Spoiler



    Wobei ich glaube das das wirklich begrenzt ist wie schnell durch die Tastenkommandos die es ja sind.
    Geändert von Liriel (29.08.2017 um 18:43 Uhr)

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  9. #9
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)
    So mal noch die Firmenvideos

    das Firmenvideo zum Splatoon 2 Plotter
    http://video.realxen.com/kuwei/COOV%...idonghuitu.mp4

    und auch ne news page aber die ist leider komplett in Chinesisch
    http://mycoov.com/zh/News/72.html

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

  10. #10
    Avatar von Liriel
    Registriert seit
    09.09.2013
    Ort
    Berlin
    Beiträge
    1.292
    Konsolen
    Switch PS4 Wii U PS Vita 3DS Wii PSP DS PS3 XBOX 360 GC SNES GB
    Sega Master System, PS VR, 3DS XL, New 3DS XL (mit wireless Laden)
    Durch Zufall gefunden
    https://www.reddit.com/r/NintendoSwi..._for_nintendo/

    Da hat einer das SH 350 getestet und es scheint zu gehen.
    Meins ist bestellt nun heißt es warten und das etwa 4 nervige Wochen.

    Scheinbar wird's auch umgelabelt und zB als Dealonow DN 350 vertrieben wie ich es sah.

    Gesendet von meinem Amazon Fire Phone mit Tapatalk
    Geändert von Liriel (31.08.2017 um 04:10 Uhr)

    Nintendo Id Liriel-666 o Liriel
    Switch Code SW-2675-3165-0419

Ähnliche Themen

  1. DSi-Zubehör
    Von axo1231 im Forum Pokémon-Welt
    Antworten: 5
    Letzter Beitrag: 03.05.2009, 19:28

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  

Anmelden

Anmelden